Question:
How can I give wood a high gloss shine?
2008-06-23 16:25:27 UTC
Hi

I am making a small wooden clock, and I want to give it a high gloss shine.

I have seen some american sites that use phrases such as 'give it a good few coats of urethane' or similar.

What would I be looking for in the UK to do this, I want to sand the pieces down, then I assume spray them with this stuff and wait for it to dry - than a good polish with a cloth.

Any help on this process and what products I can use would be very appreciated.

Thanks
23 answers:
Crawf
2008-06-24 01:07:25 UTC
Number one- never sand wood with a paper finer than 220 or 280, ever! The dust becomes too fine and clogs the pores of the wood and it will result in a bad finish. Number two- don't listen to the answer about the yacht. You aren't building a yacht.

Sand the wood down with a max 280 grit paper. If you are using a water-based finish, you need to rub the wood one more time with a damp rag to pre-raise the grain. Let it dry and sand again. If using a solvent based finish, use a tack cloth to take off the dust. Apply your finish. Let it dry and give it a rub with steel wool and use your tack cloth again ( or a damp rag if using water based - never use a tack cloth with water-based finishes, you will get 'fish eyes'.) and recoat. Give it three or four. If you want a high high gloss finish you will need to buy a rubbing compound. Talk to the guys at the wood shop.
2016-12-24 02:04:32 UTC
1
Jeralee
2015-08-19 08:02:48 UTC
This Site Might Help You.



RE:

How can I give wood a high gloss shine?

Hi



I am making a small wooden clock, and I want to give it a high gloss shine.



I have seen some american sites that use phrases such as 'give it a good few coats of urethane' or similar.



What would I be looking for in the UK to do this, I want to sand the pieces down, then I assume...
2014-10-08 13:48:10 UTC
I just came across a site with over 16,000 downloadable woodworking plans at:

http://tinyurl.com/WoodWorkingTedPlans





Here is an honest review





If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, materials lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and there're step-by-step explainations of how the plan should be done and put together.



There are several other sites whose collection of plans have the dimensions totally wrong without any indication of parts lists, material lists or the tools needed. If you're one of those people who have bought plans like this in the past, TedsWoodworking will change your perception.



In Ted's Woodworking you will get everything you need:

-Diagrams which are detailed with a full set of dimensions

-Step -by-step instructions how to start your project

-The necessary materials for that particular project

-All the woodworking tools you will need



If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions.



Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more.



There is also a lifetime member acess included in the package and you get these extras for no cost to you as they are free with no additional charges at all! This alone is worth the entire price for TedsWoodworking.



Ted Mcgrath is a very dedicated and experienced woodworker who knows what he is talking about when it comes to woodworking and DIY projects s he has been a woodworker for many many years.



Cons

There is only one drawback that we could find and that being with 16,000 woodworking plans you are bound to get some which look a little disorganized but that is understandable as it is very difficult to place all these plans into their proper categories. Secondly, it might take you a little longer to do the downloads on because of the size of them. But the members area include an option to upgrade to the DVD so you can save time on downloading.



Bottom line:

Truth is, I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.Here's the bottom line: If you are planning to start on your woodworking project, this isn't something you SHOULD use, it's something that you would be insane not to.





Check the site: http://tinyurl.com/WoodWorkingTedPlans
brott
2016-11-13 07:30:40 UTC
Wood Shine
2016-12-29 10:42:51 UTC
High Gloss Varnish
topchief
2008-06-23 16:47:12 UTC
Im no expert,but i have worked on some classic yachts and watched proffesional varnishers at work.they mix varnish with a thinner untill its almost like water and then start laying coats.After each coat has had a chance to dry they thicken the mix slightly.On new wood i saw them lay down 40 or 50 coats,lightly sanding each coat then applying the next untill finally laying the last coat of unthinned varnish.You would have to investigate their techniques further but the results were a deep glass like covering to the wood.I also remember the brushes were really expensive, some kind of animal hair i think which they protected like children.definately an art.
2016-04-22 21:16:01 UTC
If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written https://tinyurl.im/aHLKl The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions. Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more.
david m
2008-06-25 02:39:48 UTC
Sand the wood,one coat of high gloss clear varnish,allow 24 hours to dry.sand again with very fine paper and give 2nd coat of varnish.Use a good quality varnish at room temperature.Good luck.
Bloke Ala Sarcasm
2008-06-23 16:33:40 UTC
Get the varnish you want, and add a little thinner to it. This will make it apply thinly, like water. It'll help fill the gaps.

Then sand it.

Repeat that once or twice, to your suiting, and then apply at least two to three coats of the thinned varnish.

Then buff it up.



it really doesn't matter what varnish your use, as long as you ad a little thinner, like turps or something. Its only to make the varnish easier to apply, and the thinner varnish doesn't set unevenly.



The more times you sand, the better the effect will be, but if i were going to sand more than twice, I would start to use glass paper instead, as there comes a point where sand paper wont make the finish any smoother. Glass paper will help, but you'll only need to do it on one coating.



Hope that helps.
Jonathan
2008-06-23 16:30:19 UTC
You should start with a rough grit sand paper, and sand it with increasingly finer grits. Go all the way to 1000 grit. You can get 1000 grit sand paper at auto parts stores. Once you get it sanded to perfection, you can use a high gloss finish--a spar urethane, or polyurethane, but you might get a shinier finish with Thunderbird Epoxy.
L. L.
2008-06-23 16:30:43 UTC
I assume in the UK there is the product called "polyurethane". It can be water based and dries to a clear, hard finish. A few coats of this, with proper drying time between, should give you a shiny finish with no polishing. It will also protect the wood. Polyurethane in the US can be bought in either spray form or liquid (paint on) form.
2016-04-13 07:53:47 UTC
For the best answers, search on this site https://smarturl.im/aD2Im



If your stain was a oil based stain, you should be good with an oil based polyurethane clear finish. I have had very good results using a wipe-on poly, by applying several thin coats until you achieve the "build" you desire. I recommend General Finishes Arm-R-Seal Urethane Topcoat, again applying several (4-5) coats.
Greg C
2008-06-23 16:38:28 UTC
Can't be too sure on this, but I would imagine that it's more likely to be an oil of some sort repeated after each finer grade of sand paper to begin with.

Bees wax (I'm can't remember the other wax) to finish with.

p.s. no need to varnish interior.
2015-01-26 05:53:29 UTC
Want you like to get instant access to over 16,000 woodworking plans?

Check it out https://tr.im/51274

Along with stone, mud and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
THOMAS M
2008-06-23 16:30:44 UTC
Use poly urethane, but after every coat drys, use steel wool to go over the wood to remove the bubbles. The more coats, the higher the gloss
moon j
2008-06-23 16:58:11 UTC
I apologist if I sound rude...U want to spend all that money for a clock? Go to the market in UK and u can get a nice wall clock for less than $10. Never mind where it's coming from....but...the time, money, effort u spent. The question is is it worth it?
crazyydanca
2008-06-23 16:29:10 UTC
high gloss polyeurathane.

usually you paint it, not spray it.
Chris
2015-11-23 21:36:17 UTC
how can i get a glas- shine on a softwood tray
Scorpius59
2008-06-23 16:32:59 UTC
tung oil
2008-06-23 16:28:45 UTC
go to the craft store or hardware store and ask, they will help u out.
Lortl
2008-06-23 16:28:36 UTC
keep rubbin'
John J
2008-06-23 16:28:27 UTC
maybe


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...