Hi, I've Just bought a moved into a new house and two of the radiators in the upstairs bedrooms arent working. The house use's a combi boiler (about 4 years old) and i have already blead the radiators neither of them had air in.
Any ideas of the problem and how to fix them.
Thanks in advance
Eight answers:
anonymous
2008-02-14 05:01:28 UTC
Could be silt and needs flushing
RON (POP's)
2008-02-15 11:50:52 UTC
Hi
Someone has already suggested that the TRV may be stuck closed and to remove the head tap the pin with a hammer. In addition to this check that the lockshield valve at the other end of the radiator is fully open. I.E. remove the head and turn the spindle anti clockwise useing a small adjustable spanner.
Good Luck
JAMES N
2008-02-14 13:37:04 UTC
You need to balance your system, firstly check that the rad v/v's are open on the radiators that are not working, then close down one v/v on all the rest of your radiators this should divert the water to your rads. that are not getting hot, if they still do not get hot then you have a blockage in the pipework/rads/valve's concerned, if they get hot start slowly opening all closed v/v's only by a turn at a time until you get the temperature you want on your radiators, if you open them all fully you will again starve these two radiators of water
anonymous
2008-02-14 22:36:50 UTC
Are the radiator valves turned on and is there enough water pressure on the boiler. Check that the boiler pump is working when the heating is on.
anonymous
2008-02-14 13:08:01 UTC
Have the radiators got their own thermostats?
Ours did and got jammed in the off position so we removed the thermostats shook them and gave them a gentle knock or two and put them back on, they've been working perfectly ever since.
anonymous
2008-02-15 11:28:55 UTC
Are the TRV valves stuck closed? take head of and tap pin (carefully not hard). this should free up if stuck.
common if the valve has been closed for a long time.
anonymous
2008-02-14 15:51:26 UTC
if your radiators have got thermostat valve on one side
open it full and tap the metal part of the valve lightly with a hammer
digi19
2008-02-14 13:02:33 UTC
Could be on a seperate thermostat, newer combi have the option
ⓘ
This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.